CTC/Makerbot/Flashforge extruder - flexible filament upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned extruder block with smaller drive gear hole (11.8 instead of 13 mm) -> longer filament support between the…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 601
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Redesigned extruder block with smaller drive gear hole (11.8 instead of 13 mm) -> longer filament support between the drive gear and hot end so flexible filament does not get stuck in between.
As CTC that I own is an Makerbot Replicator 1 (dual) clone, it should also work for Makerbot Replicator 1 and FlashForge printers.
Update 01.04.2015: Changed hole diameter to 11.8 so it does not need sanding, moved filament hole a bit, made a bigger diameter hole on the bottom so it does not touch the gear fastening screw
Update 31.03.2016: as no changes have been made for a long time I'm unchecking the WIP marker of this thing
Update 26.06.2015: now 2 files are available: for left and right extruder
Print instructions
Category: 3D Printer Extruders Print Settings
Printer: CTC - Makerbot 1 (Dual) clone
Notes:
Best printed in ABS or Nylon as even the cold end of the extrude can get quite hot on some printers and with some materials.