See.Sense ACE Rear Bike Rack Mount (16mm diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a remix I originally did of the See.sense Ace seatpost mount by WilberX.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a remix of a remix I originally did of the See.sense Ace seatpost mount
by WilberX. https://www.thingiverse.com/thing:3281801
I recently got a dropper post on my gravel bike that will not allow me to use the seat post to mount my light since it is fully "slammed" when I have my seat in lowest position.
This will allow a See Sense ACE to go on the back of a bike rack with a 16 mm diameter round tube rail that has a center hole that is about 6 mm diameter, using an m5 nut and a 25mm m5 bolt. It also features the same cut out at the top so that the light may be charged while still mounted on the bike.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
Inland PETG
Notes:
On my Ender 3 Pro, it fits better with a 1% scale increase. Just to make sure, I did supports to build plate.
Designed by modifying original design on Tinkercad
I modified the original See.sense Ace Searpost mount using Tinkercad by separating the front and back sections into 2 pieces.
I discarded the rear piece that you would attach to the seat post. I attached a rectangle to the back middle, then I removed half a cylinder to accommodate the rack. I flipped it over and added the screw hole with the counter sink for the screw head.Category: Sport & Outdoors