Národní technické muzeum Praha / National Technical Museum Prague – 8 colors INDX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NTM Praha v 8 barvách pro INDX, šířka 220 mm. / Prague Technical Museum in 8 colors for INDX, 220 mm wide.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
Česky
Přenes si kousek pražské architektury na poličku. Tento model Národního technického muzea v Praze má propracované průčelí, zapuštěná okna s rámy a příčkami, schodiště, nápisy a barevně rozlišenou střechu. Barevné členění pokračuje i na bocích a zadní části budovy.
Model je připravený pro osmibarevný tisk na Prusa CORE One s INDX. Projekt 3MF obsahuje jeden model složený z osmi uzavřených barevných dílů s přiřazenými nástroji 1–8. Barvy lze změnit přiřazením jiných filamentů jednotlivým dílům; není potřeba znovu malovat povrch.
Rozměry a soubory
Rozměry včetně podstavce: 220 × 186 × 55,5 mm.
NTM_INDX_220mm.3mf – projekt PrusaSliceru s geometrií, přiřazením osmi barev a tiskovým nastavením.
NTM_Praha_8_barev.blend – upravitelný model v Blenderu s osmi barevnými objekty.
Tisk
Otevři 3MF v PrusaSliceru jako projekt, aby se načetlo barevné přiřazení i nastavení. Zkontroluj profil tiskárny a mapování skutečně vložených filamentů, potom model znovu naslicuj.
Připravený profil: Prusa CORE One INDX 8T, trysky HF 0,4 mm.
Materiál: PLA pro všech osm barev.
Výška vrstvy: 0,15 mm, 2 perimetry, 12 % výplně.
Automatické podpory typu snug, včetně rozhraní z nástroje 6. Po tisku je odstraň.
Tiskni podstavcem na podložce; barevné díly zůstávají sestavené jako jeden model.
Doporučené barvy
Terracotta Light – cihlová fasáda.
Matte Noctua Beige – světlý kámen, parapety a schodiště.
Matte Noctua Brown – rámy oken a dveře.
Ocean Blue – zapuštěné plochy skel.
Urban Grey – střechy.
Anthracite Grey – podstavec a podpory.
Signal White – nápisy.
Jet Black – kovové kotvy a drobné detaily.
Barvy na renderech jsou doporučená kombinace. Projekt používá PLA a všech osm náhledových barev má nastavených na oranžovou; nastav si vlastní odstíny podle palety výše. Názvy barevných dílů vycházejí z původní palety Prusament PETG. Skla jsou plné barevné plochy, průhledný filament není nutný.
Fyzický zkušební tisk zatím nebyl proveden. Obrázky jsou rendery skutečné tiskové geometrie, nikoli fotografie výtisku. Model je stylizovaná architektonická miniatura; nejde o přesně zaměřenou kopii budovy.
English
Bring a piece of Prague architecture to your shelf. This model of the National Technical Museum in Prague features a detailed front facade, recessed windows with frames and mullions, entrance steps, lettering and a contrasting roof. The color layout continues around the sides and rear of the building.
The model is prepared for eight-color printing on a Prusa CORE One with INDX. The 3MF project contains one assembled model with eight closed color parts assigned to tools 1–8. Change the palette by assigning different filaments to the parts; no surface repainting is needed.
Dimensions and files
Overall size including the base: 220 × 186 × 55.5 mm.
NTM_INDX_220mm.3mf – PrusaSlicer project containing the geometry, eight tool assignments and print settings.
NTM_Praha_8_barev.blend – editable Blender model with eight color objects.
Printing
Open the 3MF in PrusaSlicer as a project to retain the tool assignments and settings. Check your printer profile and the mapping of the loaded filaments, then slice the model again.
Prepared profile: Prusa CORE One INDX 8T, HF 0.4 mm nozzles.
Material: PLA for all eight colors.
Layer height: 0.15 mm, 2 perimeters, 12% infill.
Automatic snug supports, with support interfaces also assigned to tool 6. Remove the supports after printing.
Print with the base on the build plate; keep the color parts assembled as one model.
Suggested colors
Terracotta Light – brick facade.
Matte Noctua Beige – light stone, window sills and entrance steps.
Matte Noctua Brown – window frames and doors.
Ocean Blue – recessed window panes.
Urban Grey – roofs.
Anthracite Grey – base and supports.
Signal White – lettering.
Jet Black – metal anchors and small details.
The renders show a suggested palette. The project uses PLA and all eight preview colors are set to orange; assign your own shades using the palette above. The part names come from the original Prusament PETG palette. The window panes are solid colored surfaces, so transparent filament is optional.
The model has not yet been physically test printed. The images are renders of the actual printable geometry, not photographs of a finished print. This is a stylized architectural miniature rather than a precisely surveyed replica.