1up keyboard HSE kit compatible standoffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standoffs for the 1up keyboard HSE kit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Standoffs for the 1up HSE keyboard kit. As described in step 6 of their assembly instructions https://wiki.1upkeyboards.com/doku.php?id=kit_instructions:keyboard_kits:step_by_step
Sat down to put together their 60% keyboard kit and found that I didn't have the standoffs that should have been included. Couldn't find them anywhere so figured id take a pass at making them. They seem to work fine with the hardware that is included in the kit. I designed them at 20mm height which honestly is a little too high if you're going to do a case as well but good enough for my use.
Printed on an ender 3 V2
0.16 layer height
Still rather new to fusion360 so cant guarantee this will work for you - Thanks!