1 / 3
Case for Sony WF-1000XM4 + Tile Sticker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
My print:
polymaker TPU-95HF
0.6mm nozzle
0.4mm layer height with adaptive layers on (without adaptive layer height maybe go for 0.2)
Tree supports seemed to work best
Important: There are cutouts on the back for where the hinge goes together. Instead of actually cutting these out of the model there's an embossed line on the inside that you can follow with a hobby knife or similar. I found that it made much better prints that way.
Flip the “base” STL 180 degrees so the bottom is facing up.
The tolerances are intentionally a little tight so when printing with a flexible material it'll stay on with friction