Royal Enfield Scram 411 Glass Headlight Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experimental headlight guard for the Scram 411 glass headlight. Easy to print without supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is an experimental headlight guard designed specifically for the Royal Enfield Scram 411 with the original glass headlight.
The purpose of this part is to add a lightweight barrier in front of the glass lens that may help reduce the chance of damage from small stones or road debris.
It is important to note that this guard does not guarantee that the headlight will not break.
I printed the model successfully, but I did not end up using it on the motorcycle, so it has not been tested in real riding conditions.
I am sharing it in case someone wants to use it as a starting point, test it, modify it, or continue developing the idea.
The open grille-style design is intended to keep most of the headlight area unobstructed.
Printing
The model is designed to be printed without supports.
When printed in the intended orientation, the geometry avoids difficult bridging.
Recommended materials for motorcycle/outdoor use:
PETG
ASA
ABS
ASA is especially suitable for UV and weather resistance.
Important note
This is an untested experimental design.
Before road use, check:
fitment
mounting security
vibration
clearance
headlight visibility
beam pattern
Feedback, improvements and remixes are welcome.