Low profile proprietary rail to picatinny adapter (fits Glock 17)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glock rail to Picatinny adapter.
- Ocena
- 5 / 5
- Polubienia
- 138
- Pobrania
- 2053
- Wydruki
- 1
- Wyświetlenia
- 5967
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on other gens.
NATO Accessory Rail (STANAG 4694) used, but backwards-compatible with the STANAG 2324/MIL-STD 1913 Picatinny rail.
Print standing on front end, with a brim if having adhesion issues. Support between the rails.
Tolerances are tight, so test print using different extrusion settings to get the fit right, or sand etc until you get it snug. There is a thin wall where the screw goes through that may not print but that's normal.
Use a single M4x25 machine screw & regular nut (or lock-nut) to secure. Screw head diameter: 6.35mm. Nut: 6.8mm (flat to flat)
05.08.2025 Update: Taken down due to trademark infringement for use of the G-Word. Removed references to OEM in title.