Dell Optiplex 3070 micro 15mm HDD caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A caddy that will fit a 15mm drive for some specific OptiPlex models.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
description
The original model didn't fit in my OptiPlex 3070 micro. This one is less sturdy, but compatible.
Check whether the shape and screw layout of your CPU cooler match the one in the photo. If they do, most drive caddies found on Printables/Yeggi won't fit, and this one may be the right choice for you.
how to print
Print horizontally, as provided. Use normal snug supports. Rotating it 45° around the Z axis may give better strength and easier-to-remove supports, depending on your slicer settings.
Electronic devices can get quite warm. Do not print in PLA. PETG is advised.
how to use
Use the tool-less pins supplied with the original caddy.
Place the HDD in the caddy and hold it in place while you slide the caddy into the computer. You'll need to force a little.