18 Dart ZWQ Talon mag extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mag extenders made for the ZWQ version of the worker talons. WARNING! ZWQ mags aren’t compatible with all blasters.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Push the pin out from the original base plate; then you can slide it off and clip in the extender. (Might take a bit of effort to remove the pin and attach the extender) The extender will only work if it's facing the correct direction. The extender has bumps that clip into the preexisting holes from the pins. I have had some feeding issues with the mags, but that was due to the mags themselves, not the extender. (Fixed by wedging a piece of plastic between mag lips to widen it overnight; some darts with extra friction on the dart tips might also not work. Best used with fresh darts.)