Rolling PC Tower Stand / Caster Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rolling PC tower tray for case footprints up to 240 × 536 mm, with 6.9 mm diameter × 14 mm deep caster-stem sockets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A rolling tray for moving your desktop PC without lifting the whole tower—useful for cleaning, accessing cables, and repositioning your setup.
The design features raised retaining edges and an open base with cutouts. It has been printed and successfully used with my own PC.
Case compatibility
• Maximum stated usable footprint: 240 mm wide × 536 mm front to back.
• Check the case’s feet and underside as well as its overall dimensions to ensure it sits securely.
Caster mounting
• Socket diameter: 6.9 mm.
• Socket depth: 14 mm.
• Select stem casters compatible with these sockets. Printed tolerances and caster retention features affect the final fit.
Assembly
Fit compatible casters into the underside sockets, check that they are securely retained, and place the PC onto the tray.
Tested successfully with low infill pla
model is too big for a single build plate so i used orca to slice it up