1 / 1
Schutzkappe M16x1,5 für MINIMESS Anschluss — zdjęcie 1

Schutzkappe M16x1,5 für MINIMESS Anschluss

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-druckbare Schutzkappe für einen MINIMESS Anschluss mit M16x1,5 Außengewinde.

Ocena
5 / 5
Polubienia
0
Pobrania
1
Wydruki
1
Wyświetlenia
22
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🇩🇪 Deutsch

Schutzkappe für MINIMESS Anschluss

Ich habe diese Schutzkappe konstruiert, nachdem ich die originale Kappe meines MINIMESS Anschlusses mit M16x1,5 Gewinde verloren hatte.

Die Kappe wird direkt auf das Außengewinde des Anschlusses geschraubt und dient dazu, den Anschluss vor Schmutz, Staub und Beschädigung zu schützen.

Für die Außenseite habe ich testweise eine Rändelung vorgesehen, damit sich die Kappe auch ohne Werkzeug besser greifen und auf- bzw. abschrauben lässt.

Die Rändelung habe ich dabei testweise mit dem Fusion Assistenten in Autodesk Fusion erstellt. Das war für mich gleichzeitig ein kleiner Praxistest, wie gut sich solche Geometrien damit erzeugen lassen.

Das Modell ist als einfache Ersatzlösung für den 3D-Druck gedacht. Wenn die Kappe verloren geht oder beschädigt wird, kann sie ohne großen Aufwand erneut hergestellt werden.

Technische Daten

  • Gewinde: M16x1,5

  • Ausführung: Schutz- bzw. Verschlusskappe

  • Außenbereich mit Rändelung

  • Montage: Aufschrauben auf den Anschluss

Die Bezeichnung MINIMESS wird hier ausschließlich zur Beschreibung des vorgesehenen Anschlusses verwendet. Das Modell ist keine originale oder vom Hersteller bereitgestellte MINIMESS Ersatzkappe.

Hinweis: Die Kappe ist als Schutzkappe vorgesehen und nicht als drucktragendes Bauteil. Nicht bei unter Druck stehendem Hydrauliksystem montieren oder demontieren.

Vor der Verwendung sollte geprüft werden, ob Gewinde und Abmessungen zum eigenen Anschluss passen.

Version 1.0

Erste veröffentlichte Version.


🇬🇧 English

Protective Cap for MINIMESS Connection

I designed this protective cap after losing the original cap from my MINIMESS connection with an M16x1.5 thread.

The cap screws directly onto the external thread of the connection and protects it from dirt, dust and mechanical damage.

I added a knurled outer surface as a test feature to make the cap easier to grip and screw on and off without tools.

The knurling was created experimentally using the Fusion Assistant in Autodesk Fusion. This was also a small practical test to see how well the assistant could generate this type of geometry.

The model is intended as a simple replacement solution that can be produced using a 3D printer. If the cap is lost or damaged, it can easily be printed again.

Technical specifications

  • Thread: M16x1.5

  • Type: Protective / sealing cap

  • Knurled outer surface

  • Installation: Screws onto the connection

The term MINIMESS is used solely to describe the intended connection. This model is not an original MINIMESS replacement part and is not provided by the manufacturer.

Note: The cap is intended as a protective cap and is not designed to be a pressure-bearing component. Do not install or remove it while the hydraulic system is pressurized.

Please verify that the thread and dimensions match your particular connection before use.

Version 1.0

Initial public release.

Tagi