Vacuum Hose (31mm) Right-angle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a right-angle adapter for 31mm vacuums and shopvacs and similar hoses.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
This is a right-angle adapter for vacuum hoses and nozzles. My use was to turn my shopvac hose sideways when plugged into my scroll saw, table saw, miter saw, sander, or other garage tools. This model is sized for a 31mm hose, but you should be able to scale it to whatever size vacuum hose you need to attach it to.
I printed in PETG, with .2mm layers. I printed the model on the elbow, so it looked like a "U" or a smile standing up on the print plate. This orientation provides much better strength, but does require a raft and/or supports near the plate.