Snag Saver Cutter Mount for Hydra / Kraken AMS HT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snag Saver Cutter Mount for Hydra / Kraken AMS HT
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
About
This is a mount that adds Snag Saver Cutter V5.0 compatibility for both Hydra AMS HT and Kraken AMS HT.
It is compatible with both Hydra AMS HT and Kraken AMS HT as they share the same mounting near the front filament entry.
Print Settings and Assembly Instructions
Due to licensing, I'm not allowed to include the actual snag saver cutter here, this page is just the mounting for attaching it to Hydra / Kraken AMS HT for full compatibility.
First of all, follow the full instructions over at the Snag Saver Cutter V5.0. As we only have one feeder in the AMS HT, of course you just need one set of snag savers rather than four. You also don't need any feeder mounting as we attach it directly to our Hydra / Kraken AMS HT main frame.
I would recommend downloading this set named "AMS 2 Pro Saver Snag Cutter V5.0.4", it should be one of the top print profiles on the page:

Then, delete everything except the following and keep just one copy of each:
Body, AMS 2, 3.0, 3.3 - V5.7.0.STL
Instruction Plate - V5.2.1.STL
Slide, AMS 2, Normal - V5.6.0.STL
Arm, Long Blade, Normal Gap - V5.3.2.STL
Arm, Short Blade, Normal Gap - V5.3.2.STL
Guide, AMS 1, AMS 2, Universal - V5.2.1.STL
Lock - V5.3.0.STL
Then, arrange the parts automatically as per below:

I will not cover the snag saver cutter assembly here, please follow the instructions on the actual Snag Saver V5.0 page.
Next, print the Snag Saver V5.0 Bracket for Hydra AMS HT / Kraken AMS HT included on this page, it's just three small parts.
I recommend using 4 walls and 30% infill, meaning a pretty solid print. I've also added some supports over the left and right mounts but you can probably do without them if you like.
If you're uncertain you can use the print profiles where everything is prepared.

Installing the Bracket and Snag Saver Cutter V5.0
Once you have everything printed and have assembled your Snag Saver Cutter according to the instructions from that page, begin by attaching the long base (here in green) with two socket heads to your Hydra / Kraken AMS HT, length of the socket head is not very important but around 20 mm is good:
kraken-ams-ht-snag-saver-main-mount-1.00.3mf

Next, attach the right mount (here in purple), it's using a combination of a dovetail and M3 socket head attachment. Use a 10 mm long M3 socket head here:
kraken-ams-ht-snag-saver-right-mount-1.00.3mf

Slide in the assembled Snag Saver Cutter into the right holder. In the pictures below is is only the main cutter frame for demonstration purposes.

The follow with the left side of the mount, it is also using a combination of dovetail and M3 socket head. Use a 10 mm M3 socket head:
kraken-ams-ht-snag-saver-left-mount-1.00.3mf

All done!
Pictures
Below is Kraken AMS HT with the AMS Snag Saver Cutter V5.0 installed using the bracket, picture courtesy of yukidaruma in our Discord group.
He also has the Kraken AMS HT Desiccant Holder installed, see link below.
Kraken AMS HT Desiccant Holder (By RifRaf)
