Repair Tabs for Honda CRX 88-89 Bumper Turn Signal Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part repairs the turn signal housing tabs that are common to break off on these.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The tabs on the turn signal light housing broke off and rather than reprinting the whole thing, i just made a part to repair the old one. Mine is cracked in other places but id rather not replace it right now. You will need to trim away some of the plastic to make room for it to fit. There shouldn't be any need for glue but you could if you wanted to, there is a hole where the screw would end on the light housing that is used to guide a drill bit. Drill out the hole so the screw can pass through the light housing and grip into the printed part, you will of course need a longer screw. This should be enough to hold it on but you can add glue and what not to repair yours.
I printed from PETG and we will see how it holds up. I did it mostly for temp resistance and flexibility since i figured ABS might be too rigid. Printed on the edge with the tabs pointing to the side, use supports.