2011 2K11 Magazine Loader (Springfield Echelon mag too)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assists loading 2011 style mags, or double stack 1911 magazines if you prefer. Also works on a Springfield Echelon mag.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a loader intended to help when loading magazines for double stack 1911 or 2011 style pistols.
Push the loader down onto the mag, push the round down and back against the tab on the loader, then slide the loader back up while pressing the round back against the loader. It sounds more involved than it is.
You can print it however you like but I chose to try it upside down with no supports. Worked well enough for what it's for. I used Pro PCTG filament for this one. It was designed with 1.8mm walls since I use a 0.6mm nozzle for pretty much everything.
The dog paw is there because A) I like dogs and B) I've already found one place selling one of my designs. That's ok, they're not getting rich off of it but if they're going to be lazy and borrow a design it's going to have an identifier on it.
10/8/26 EDIT: Version 2 uploaded. The tab was modified to make it easier to slide the rounds in. I also discovered it fits loose but still works on Springfield Echelon mags too.