1 / 7
Grip frame insert plug for Glock 19 Gen6
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plug to cover the hole in the Glock grip compatible with backstraps. Easy to print. Fusion 360 model included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
A simple plug to cover the hole in the Glock grip. Easy to print, uses less than 2g of filament, and prints in under half an hour. Supports are required, but only on a small area.
Tested with a Glock 19 Gen6; it will likely fit others as well. The plug is also compatible with backstraps, , which was not the case with another model I tried.
In addition to the STL model, I am also attaching a 3MF project with the print settings I used, as well as the Fusion 360 model.