Rattle Free Hesdriver With Internal Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finally, a driver that doesn't rattle while carring 4 bits. STEP files included!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I was fed up with my pocket ratteling, so i designd this driver to harness the power of TPU.
I also made a Stubby version but havent printed it yet so no pictue :(.
What you'll need:
ridid filament (eg. Pla or Petg)
flexible Filament (er. Tpu)
superglue
optional but recommended: round magnet (sizes at the bottom)
Printing and assembly:
The bitholder and sleeve aret o be printed in a flexibel the case and rear in a ridgid filament. No Supports!
To add the magnet simply add a pause before the foid gets filled. When using a steel nozzle adab of superglue will help retain the magnet.
Once all the parts are off the printer glue the sleeve into the case and the Bithoder onto the rear.
Note that there is no orientation for the sleeve.
If you need help remixing for a diffrent ,agnet size or with slicing just shoot me a message.
Magnet sizes:
8x3mm
8x2mm
6x3mm
6x2mm
5x3mm
5x2mm
4x2mm