Ecoflow Wave or portable aircon Exhaust adapter for motorhomes/RV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects your Wave exhaust duct to existing vents in motorhome
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Allows you to plug in the exhaust duct from an Ecoflow or other portable aircon into the existing vent holes (normally used for hot air into the motorhome from the heater).
The venting on my Rimor splits into many ports inside the motorhome, so you may need to close some of the flaps on them if you find its just pushing the air out of one or more of them.
Note that some people may comment on the possible changed exhaust airflow this causes, and its possible impact on the condenser, therefore, use at your own risk.
I wish Id done this while the heat of the summer was still in full force!
Suggest print in PETG or better high heat tolerating filament. 0.24 layer and 8% infill is fine.
Thanks to Federico Poli's Custom Parametric Pipe Adapters - MM and Inches for the concept and main reducer.