Case IH Puma Hydraulic Control Knob (Replacement / Repair)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement yellow hydraulic control knob for Case IH Puma tractors. Reuses original brass insert.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v3.0
Replacement hydraulic control knob (yellow cap) for Case IH Puma tractors (such as Puma 165 and compatible models with electronic/mechanical remote valve levers).
If your original plastic knob is cracked or broken, this 3D printable model is a cost-effective solution.
⚠ Important Note:
This model is designed to reuse the original brass threaded insert from your old broken knob. You will need to extract the original brass insert (e.g., by gently heating it with a soldering iron) and press or melt it into this printed part.
Print Settings:
* Material: PETG, ABS, or ASA recommended (better UV and temperature resistance than PLA inside the cab).
* Perimeters/Walls: Set high (or fully solid) for maximum strength around the thread.
* Layer Height: 0.2 mm or 0.16 mm for clean threads/fit.