Krause MultiMatic Ladder Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My old Krause MultiMatic ladder lost it's rubber feet years ago and the company is now out of business. Without the…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 960
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
My old Krause MultiMatic ladder lost it's rubber feet years ago and the company is now out of business. Without the rubber feet it's not really safe to use on concrete fully extended as it can slide out from under you. Since the company is out of business this is my attempt to make it usable again. Besides, it's fun to print stuff!
Note! Print open side up and you won't need any supports. 30% infill gives a fair amount of flex when I put my full 250 pounds on it, lower that for more flex or raise it for less. Test it out carefully and be safe!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
30%
Filament: FoxSmart TPU Blue
Notes:
Print open side up! I used 25mm/sec, 30% infill, no retraction, part cooling 2nd layer, 220c nozzle, 50c glass bed with hairspray.
Category: Replacement Parts