3D Layered Pumpkin & Crow Display / LED Backlit Accent Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layered pumpkin & crow tabletop LED display! Multi-color assembly, alignment pegs, wire routing base & optional leaves.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Add a rich, dimensional piece of autumn decor to your home with this 3D Layered Pumpkin & Crow Display! Featuring a crow perched atop a tiered pumpkin with optional oak leaves, this piece brings a warm seasonal feel to any desk, mantel, or shelf.
Originally crafted as a custom wooden project, this design has been translated into the 3D printing world with exact alignment features and clean tolerances. Whether you want a vibrant multi-color 3D printed display piece or precise physical template guides to cut your own version out of wood, this model is built for a clean, professional finish!
Assembly & Details:
Pin Alignment: Features two integrated alignment pegs on the crow's body to lock the wing in place, plus a half-round tab for precise beak placement during assembly.
Modular Leaves: Includes optional leaves that can be glued anywhere on the display. Files are provided in both STL and 3MF formats so individual parts can be printed separately.
Integrated LED Base: The base features an integrated inset channel to run an LED strip directly across the base itself, providing bright backlighting to illuminate the layered silhouette.
Be sure to explore the rest of my lighting collection here: Illuminated Silhouette Collection
Key Features:
Multi-Color & Layered Assembly: Designed with precision cutaway sections where pieces intersect, ensuring a seamless, flat back face and easy alignment during glue-up.
Detailed Eye Inset: The crow’s head features dedicated inset for multi-part eye and pupil, allowing you to easily print contrasting colors without complex filament swaps.
Precision Fit & Wire Management: The base features built-in alignment insets and tabs to securely slot the display upright, along with a discreet rear slotted pass-through to route power cords cleanly out the back.
Woodworker & Hybrid Friendly: Functions as a physical template guide if you prefer cutting real wood for a hybrid build!
Dimensions
Base: 10” X 3” (0.5” rounded corners) X 0.375”
Pumpkin Width: ~8.8”
Pumpkin Height: ~7.6”
Crow Width: ~8.5”
Crow Height: ~6.5”
Total Height: ~12.9”
Component Thickness:
Pumpkin: Layered (1) 0.25” + (2) 0.125” (Total 0.5”)
Crow: Body 0.25” / Wing 0.125” / Eye 0.125” / Pupil 0.0625”
Leaves: .0125”
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm
Infill: 20% or higher (Gyroid or Grid).
Orientation: Print flat back face down on the build plate for a smooth surface finish.
Supports: None required
Looking for other Pumpkin variations?
Check out my companion listings here: