Science Olympiad Boomilever 2026-2027 Division B Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a jig for 2026-2027 Science Olympiad Boomilever event. This one jig would work for both bonus and non-bonus.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
Science Olympiad 2026-2027 Boomilever Division B Bonus and Non Bonus Jig
This is the Division B Boomilever building jig. The backplate includes 2 mounting holes which could be used for both Bonus design and Non Bonus Design with only one set of jigs. To build a Bonus (15 cm) boomilever, mount the bolt assembly on the lower hole. To build a Non Bonus (20 cm) boomilever, mount the bolt assembly on the upper hole.
The hardware includes:
1* Connector Bolt, 1/4-20 x 2.36 inches (60 mm) long, with a 0.66-inch (17 mm) diameter head and 0.78 inch (20 mm) unthreaded section
2* Hex Nut, American National Standard, 1/4 — 20, 0.23-inch-thick maximum
2* Flat Washer, USS 1/4 inch, approx. 3/4 inch outside diameter x 0.09-inch-thick maximum
Link to purchase these hardware
The jig includes:
1* Division B Assembly Jig
2* Division B Half compression Jig