Wall-Mounted Wine Bottle Holder — Discreet and Easy to Use
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-Mounted Wine Bottle Holder — Discreet and Easy to Use
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wall-Mounted Wine Bottle Holder — Discreet and Easy to Use
Showcase your wine bottles with this simple, understated wall mount! Just secure it with two screws, then place the bottle in its cradle.
The bottle sits with its base towards the wall and its neck facing you, tilted slightly upwards. Once in place, it conceals most of the holder and both mounting screws, keeping the focus on your wine.
A Simple, One-Piece Design
The model shown is printed in black PETG-CF, whose matte finish pairs particularly well with wooden panels. The cradle supports the bottle’s body without gripping its neck, making the bottle easy to place and remove.
It is designed to accommodate various 750 ml bottle shapes, including champagne bottles. Always check that your bottle sits securely in the cradle before use.
Print Settings
Material used: PETG-CF.
Walls: 4.
Infill: 10% gyroid.
Printing supports: none.
The model prints easily in one piece, with no assembly required.
Wall Mounting
Both mounting holes are 3.5 mm in diameter. Choose screws that fit these holes and are suitable for your wall or panel. Use appropriate wall plugs or anchors where required.
A full bottle places considerable stress on the holder and its fixings because its weight extends away from the wall. Secure the holder to a solid surface and check that it is firmly attached before placing a bottle on it.
Install multiple holders to create a personalised wine display in your cellar or tasting area!