1 / 2
Marlin 2.0 for PK 8, former Anet A8 with BLTouch and full graphics display. — zdjęcie 1
1 / 2

Marlin 2.0 for PK 8, former Anet A8 with BLTouch and full graphics display.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Edit 2: Now with "Safe Z Homing", but due to the fact my PKM8 is highly modified, i recommend you to edit…

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
484
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Edit 2: Now with "Safe Z Homing", but due to the fact my PKM8 is highly modified, i recommend you to edit configuration.h's

define X_MIN_POS

define Y_MIN_POS

and

define MANUAL_X_HOME_POS

define MANUAL_Y_HOME_POS

Edit: That's the thing with "Work im Progress"... i totally forgot about bed size, nozzle position and homing.... I'm working on it....

This is my attempt to run Marlin 2.0 on my PKM8 (former Anet A8) with Anet3D V1.5 board using Atom, Clang and GitHub.

I won't make a tutorial. If you have no idea, what's going on, go make your homework and figure out, how to update a firmware. (Crosslink or TeachingTech on Youtube for example)

Ignore the*.stl, Thingiverse wanted at least one, or spread the Glasflügel - gospel. ;)

Marlin 2.0 Github: https://github.com/MarlinFirmware/Marlin/tree/2.0.x

Atom text editor: https://atom.io/

Git client download: https://git-scm.com/downloads

Clang: https://github.com/Microsoft/clang

I implemented BLTouch like it is well documented on thingiverse https://www.thingiverse.com/thing:2091529

My offsets are #define NOZZLE_TO_PROBE_OFFSET { -25, -15, -1.55 }

For my own PKM 8 build i need #define INVERT_Y_DIR true

I use an A6 Full graphics Display, #define ANET_FULL_GRAPHICS_LCD

you may consider changing to the stock zonestar in cofiguration.h.

I had to free some memory capacity, therefore:

  • No SD-Card Support, use Octoprint, or connect to your PC.
  • No M503! U can use M501 and Marlin will report after...

Use @ your own risk. I know nothing about your printer, therefore i am not responsible, if you brick your Board. ;)

Have fun.

Category: 3D Printing

Tagi