Functional 4-Post Moving Car Lift (1:64 Scale)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
• Working 1:64 scale 4-post car lift featuring a drive-on platform with a mechanical pin-locking system to hold your Hot
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### 1:64 Scale Functional 4-Post Car Lift (With Pin-Locking System!)
An interlocking, fully working 4-post car lift for your diecast mechanic bays and garage dioramas. This upgraded version features a mechanical pin-locking design—simply slide the locking pins through the pillar holes to securely hold the platform at your desired display height!
📐 Dimensions (True 1:64 Scale)
• Total Outer Frame Width: 54.0 mm
• Inner Platform Width: 50.0 mm (Leaves a perfect 2mm clearance gap to prevent jamming)
• Platform Length: 75.0 mm (Fits standard Hot Wheels/Matchbox vehicles)
🛠 Functional Features
• Dual Safety Lock Bars: Slide the provided orange pins through the front and back columns to lock the vehicle platform in position.
• Easy Entry Ramps: Built-in beveled approach ramps for easy vehicle staging.
🖨 Printing Tips
• Interlocking Parts: Do not group the platform, the pillars, or the locking pins! Keep them as separate entities in your slicer so the moving components print independently.
• Orientation: Print the frame sections and the flat platform deck completely flat on your build plate. No supports are needed!
• Settings: 0.1mm or 0.15mm layer height ensures smooth sliding channels and perfectly circular pinholes.