1 / 2
Honeycomb Wall – Rotated Empty Insert (90°) — zdjęcie 1
1 / 2

Honeycomb Wall – Rotated Empty Insert (90°)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Empty insert for the Honeycomb Storage Wall with the opening rotated 90°, for walls built with rotated panels.

Ocena
5 / 5
Polubienia
6
Pobrania
22
Wydruki
1
Wyświetlenia
59
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Remix of the empty insert from RostaP's Honeycomb Storage Wall:

https://www.printables.com/model/152592-honeycomb-storage-wall

WHY THIS REMIX?

I mounted my honeycomb panels rotated by 90°. The original inserts still clip into the cells, but their hexagonal opening no longer lines up with the accessories (hooks, holders, boxes…).

So I modified the insert-empty file to reorient the opening. The outer shape and clip system are unchanged; only the central opening has been rotated by 90°.

WHO IS IT FOR?

Anyone who built their wall with the panels rotated 90° and wants to use the accessories designed for the empty insert.

PRINT SETTINGS

- Layer height: 0.2 mm

- Perimeters: 4

- Infill: 20%

- Supports: none

- Material: PETG (PLA works too)

All credit for the original design goes to RostaP. Check out the original model and its remixes for tons of compatible accessories!

Tagi