Huawei MateBook 16s — Compact Laptop Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact risers for the Huawei MateBook 16s 2023, designed to raise the laptop above the desk.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Compact risers for the Huawei MateBook 16s 2023, designed to raise the laptop above the desk and provide more space beneath it. Suitable for a desk setup with the laptop lid closed and an external monitor.
The set consists of four separate supports placed beneath the laptop’s original rubber strips, approximately 6 mm wide. The open-ended groove lets you position each support along the strips while keeping ventilation openings clear.
Dimensions per support:
Height: 18 mm.
Base: 32 × 24 mm.
Main groove width: 6.6 mm.
Groove depth: 2 mm.
Rounded body corners.
18 mm is the height of the printed part. The actual clearance beneath the laptop depends on the shape and compression of its rubber feet.
Suggested starting print settings:
PETG, 0.20 mm layer height, 4 walls, and 25% infill. Print with the base flat on the build plate and the groove facing upward. No supports required.
Included files:
riser_18mm.stl— one full-height support.risers_4pcs.stl— four supports arranged for printing.fit_test_5mm.stl— a low-profile fit test.
Print the fit test first and check it against the laptop’s rubber strips. Under load, the plastic edges should remain clear of the metal chassis. Once the fit is confirmed, print the complete set.