1 / 4
Magnetic Humidor Holder for Boveda 320 & Aqara — zdjęcie 1
1 / 4

Magnetic Humidor Holder for Boveda 320 & Aqara

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic lid mount for Boveda Size 320 and Aqara sensor. Fits Adorini Torino Cedro Deluxe. PETG; no supports or brim.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Mount a Boveda Size 320 pack and an Aqara temperature/humidity sensor inside your humidor lid, without drilling or taking up cigar space. Designed and used in an Adorini Torino Cedro Deluxe.

Why I made it

Humidity was frustrating to manage, so I went data-driven. Boveda buffers humidity; Aqara measures it. I use Home Assistant with my own Zigbee bridge. Home Assistant is optional; Aqara hub/app is another option. Check support for your exact sensor and third-party Zigbee coordinator.

Parts and hardware

Size 320 is larger than my humidor needs, but works and is easy to find. Keep its housing as pictured and follow the packaging instructions.

Fit and printing

The Adorini lid has an embedded metal plate. Plain wood alone is not magnetic. Check lid clearance and retention with the holder loaded.

  • PETG, 0.4 mm nozzle, 0.20 mm layers

  • 2 walls, 15% infill; no supports and no brim

  • Center on the plate. Part size: 216.6 × 158.2 × 23.7 mm.

  • Does not fit the intended flat footprint on an A1 mini.

PETG is my recommendation for this application; PLA is not recommended. The supplied Bambu Studio project is printer-specific: select your own printer/preset and re-slice rather than running another printer’s G-code. STL and STEP are platform-neutral source files.

Assembly

  1. Check polarity and keep all 20 magnets consistently oriented.

  2. Press-fit the magnets. I used light tapping: support the print and use a wood/plastic spacer, not a direct metal hammer blow on brittle magnets. Stop if excessive force is needed.

  3. Load Boveda and Aqara as shown. Do not puncture the humidity pouch or block the sensor openings.

  4. Mount inside the lid, check loaded retention/clearance, then close gently.

Keep loose magnets and batteries away from children/pets. Keep liquid away from electronics. This is a mount, not an active humidity controller or certified tobacco-contact material.

My seasoning experience

Before adding cigars, I wet a new/clean microfiber cloth with distilled water, wrung it until it stopped dripping, lightly wiped the interior walls and unfolded it flat on the bottom with Boveda/Aqara installed above. RH initially rose above 80% in my Home Assistant readings. After about two days I removed the cloth; when RH did not drop immediately, I added cigars and let it settle toward my 72% target.

This is personal experience, not a universal readiness test. Follow humidor/Boveda instructions. Do not soak wood, leave damp cloth indefinitely or add cigars during excessive humidity. Two days or a briefly stable reading is not a guarantee: wood, seals, temperature, contents and sensor accuracy affect the result.

Files and license

Fine-resolution millimetre STL, editable STEP and a clearly printer-specific Bambu 3MF. CC0 1.0 Universal: copy, modify and use the original model commercially without attribution. Third-party names identify compatibility only; no affiliation implied. r01: original single-piece holder.

Tagi