Humane Mouse Trap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Found a live, humane mouse trap on Thingverse from MikeJeffs. Nice to share it here as published.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a simple easy to make live mouse trap to catch the little home invaders and relocate them to somewhere else in the food chain. I looked on several websites and found this one, which proved to meet my criteria. Print using 0.2mm layers. All parts can be printed at same time. Assemble by putting the trigger plate in first at an angle, it will fall into place. Then install the door with the thicker weighted part on the inside. The door lock clicks into place on the top slot. The bait plug screws into the far end. Full credit to Mike Jeffs. Thanks.