Flying Saucer Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Lamp Base for my Flying Saucer Build
- Ocena
- 5 / 5
- Polubienia
- 378
- Pobrania
- 590
- Wydruki
- 0
- Wyświetlenia
- 4706
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Lamp Base for my Flying Saucer Build:
It Spins:
This is a relativity easy two color print. Or you can print the Base and Shade separately and glue them together.
This is the LED Lamp I used: https://www.amazon.com/dp/B0DDTQ1GV5
The LED Lamp presses into the bottom and holds firm.
I used a Clear Pla for the shade: https://www.amazon.com/dp/B0CZRYLNBV
The base and shade were printer with a standard .200 setting. No supports necessary.
The base had a 15% infill and the shade was printed at 25% (Gyroid). The Gyroid gives it kind of a crystal effect.
Enjoy