1 / 8
Tronxy D01 Part cooling fan mod 4020 fan — zdjęcie 1
1 / 8

Tronxy D01 Part cooling fan mod 4020 fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you like my work please consider buying me a coffee https://ko-fi.com/philm Update 5Jan2021> revised bracket plate…

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you like my work please consider buying me a coffee https://ko-fi.com/philm

Update 5Jan2021> revised bracket plate to R2 . Minor refinements

This is a mod to replace the OEM part cooling fan for a 4020 fan & ABL sensor

It involves cutting away a small section of the OEM hot end housing sheet metal (cut area shown in pic) however it is reversible should you want to go back The cut away will not influence the OEM fan arrangement.

The fan duct is glued into the fan with a small amount of hot glue so it can be removed if needed.

If you have questions just let me know in the comments

Print Settings

Printer:

TRONXY D01

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

40%

Filament:

ESUN PLA+ or PETG

Black


Notes:

The fan duct will need supports

Category: 3D Printer Parts

Tagi