Switchboard for Inbxx-L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switchboard is an addon for the Inbxx-L that allows for easy swapping of filaments
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Switchboard is an addon for the Inbxx-L (it will work on Inbxx if the screw spacing is the same, if not let me know) that allows for easy swapping of filaments without the hassle of moving spools around. Just retract the filament below the ptfe coupler, swap the ptfe tubes, and reload the filament. For users with a double 5x1kg set up there is also two blank positions used to hold the extra ptfe tubes that Indxx is not using.
There are two versions that support pc4-m6 couplers. The first requires either an M6 tap or use the coupler to cut threads. The second uses M6 6x9x8 heatset inserts.
Also includes are 10 plates (A through J) to label the spool rolls. Letters are used instead of numbers to avoid confusion with the 1-8 of the Indx tools. I will make flags similar to what Prusa has released for the PTFE tubes at the switchboard in the future.