Detailed Halloween Wall Bat, Flat Back for Bat Swarms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flat-backed wall bat with wing bones, membrane wrinkles, a furry body, bulging eyes and tiny fangs. Print a swarm and
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make a bat swarm fly across your wall. Each bat is a detailed relief with wing bones and joints, wrinkled wing membranes, a furry body, pointed ears with inner detail, bulging eyes, a little snout and tiny fangs. The back is completely flat, so it prints fast and sticks to walls with double-sided tape or poster putty.
Features
114 mm wingspan, only 8 mm thick
Flat back, no supports, quick to print in batches
Fills a build plate nicely: print 4–6 at a time
Size: 114 × 37 × 8 mm
Scale between 60% and 150% for a swarm with depth
Print settings
Supports: none
Layer height: 0.12–0.16 mm
Walls: 2, infill: 15%
Filament: black or purple matte PLA; silk purple catches the light nicely