HKS BOV Flange Adapter For Suzuki Cappuccino
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter that allows you to put a HKS BOV onto the stock BOV location on a EA11R Suzuki Cappuccino,
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter that allows you to put a HKS BOV onto the stock BOV location on a EA11R Suzuki Cappuccino. The BOV I used was a knock-off that came with and HKS style flange that went to a 34-35mm aluminum tube. This part mounts to the compressor outlet pipe replacing the factory circulation valve. To attach the BOV to the adapter you will need two appropriate sized worm clamps and a 35mm to 35mm silicone coupler.
Print using a high temperature filament as the the flange is above the exhaust manifold. For my print I utilized PAHT-CF filament and used insulating materials to protect the flange.
