Repeater Pro Spring Tuning Spacer Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of 3D-printed spacers to fine-tune the performance of the Dart Zone Repeater Pro lever-action blaster.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Repeater Pro Spring Tuning Spacer Set uses a series of 3D-printed spacers to fine-tune the performance of the Dart Zone Max Nitroshot+ Repeater Pro Lever Action Blaster with the installed spring. This set includes one full-size spacer and one half-spacer to add pre-compression to the stock spring in simple increments with minimal tools.
FEATURES:
• Repeater Pro Spring Spacer Set
• Fine-tunes spring pre-compression
• Dial in your blaster’s performance
• Easy to install; easy to remove*
• Designed for the Repeater Pro only
*Precompressed springs are more likely to "take a set" and lose performance. Do not store your blaster with the spacers installed!
PERFORMANCE:
Average FPS (Standard Deviation) with the 1.70 spring and 210mm barrel
• 153 (6) stock (without spacers)
• 166 (5) with 5mm of spacers
• 178 (3) with 10mm of spacers
• 185 (2) with 15mm of spacers
FILES INCLUDED:
• 1 10mm Spacer
• 1 5mm Spacer
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 5 wall loops, 20% Infill