Dart Zone Repeater Pro RedCowl Collet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative collet for the Dart Zone Repeater Pro Lever-Action Blaster using RedCowl's hardware-free collet system
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Repeater Pro RedCowl Collet is a 3D-printed muzzle for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece hardware-free clamp using RedCowl's this mod part makes performance tuning easier with quick, convenient barrel swaps. Additionally, the replacement front end installs near-toollessly with the original twist-lock BCAR mount.
Note: I have not yet printed this version of the collet. Because of the friction involved in RedCowl's collet, the twist-lock collet receiver may disengage before the collet key does.
FEATURES:
• Repeater Pro RedCowl Collet
• 3D-printed barrel swap upgrade
• Easier performance tuning
• Printed in OOD Orange
• Easy to install!
• Designed for the Dart Zone Max Repeater Pro
• Compatible with barrels 300 mm (~12in) or longer
• Partially compatible with 250mm (~9in) barrels
• Not compatible with the stock 210mm barrel
*The 250mm barrel does not stick out far enough to accept rifling attachments.
PERFORMANCE:
Average FPS (Standard Deviation)
• 153 (6) FPS with included 1.7 x 205mm spring + 12.9 x 210mm barrel
• ~205 FPS with 1.9 x 205mm spring (cut) + 13 x 300mm barrel
FILES INCLUDED:
• 1 Repeater Pro Collet Receiver
• 1 RedCowl Collet Key
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 4-5 wall loops
• Others: Inner brim for better bed adhesion
MORE LINKS:
• Dart Zone Repeater Pro
• More Repeater Pro Mods + Accessories