1 / 7
SLA print head - yoke
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Definitely a work in progress . Designed a FDM printable head that can adjust the print bed to flat and level in the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
Definitely a work in progress . Designed a FDM printable head that can adjust the print bed to flat and level in the resin bath with out the need for leveling screws clamps etc
Slot hole in clamp knob is for an M6 nut ( 10mm across flats)
Category: 3D Printing