VROptician Quest 2 to Steam Frame lens adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
quick-and-dirty adapter for VROptician q2 lenses to fit them to a steam frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a stopgap so that i can use my Frame without fear until my proper lens inserts arrive. "thin" inserts are for thinner lenses, "thick" inserts are for thicker ones. -3.5 diopter lens fits in the "thin" type, -4.75 fit in the "thick" ones.
To be very clear: these adapters are not intended as a permanent solution, they compromise compactness and FOV for a massive clearance of the Frame lenses, to avoid scratching them. The model files are a mess, but are available here . If you make improvements to these, im interested to see them!
Printed with PLA on an ender 3 v2 w/BLTouch & PEI build plate, 4 walls, 30% infill. Print frame-side down, to preserve the clips that hold the lens adapter in. use small bits of double sided tape to secure the adapter to the frame's lens stack/tower thing.
Assembly tips:
Dont be like me, take note of which lens is which & dont lose track of them!
note that the lenses can be put in "upside down" , for my lenses they needed to be put in with the concave bit facing outwards (i,e towards my eyes)
Seems to work fine with the eye tracking, ymmv.
Thanks to AnonymousHermit for their lens template, which i based this off of!
