Table Top Hydroponics with a tube feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create my own hydroponics system. If you print 3 towers and add the base it stands about 13" tall
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I've designed my own tower based off different elements i liked from other towers like the tube feeder in the middle, the cup design, or even the dispenser at the top. The basin top is designed to fit a specific plastic container so that water isn't sitting in a 3D printed base. The container bottom, pump, and other materials can be found here: https://www.amazon.com/shop/jsymone/list/98RNARZQROZT?ref_=hype_hm_sf_e&tag=janiyahrobins-20&originMarketplaceId=ATVPDKIKX0DER
For a complete tower i would print at least 3 tiers. It should stand about 13" tall fully put together. Unless you add more tiers then it'll be taller. Each tier holds 3 cups, and the basin top has a handy pour hole and chord hole.