Picatinny Receiver Blank (No Hardware)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 1 "No Hardware" Picatinny Receiver Blank. Perfect for remixing and modeling any kind of sight or scope you want.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This fully no-hardware receiver is designed for creating custom sights, scopes, and other rail-mounted accessories. Simply slide the receiver onto the rail and insert the locking pin to secure it in place.
Print Settings
Hardware Pin
1. 100% infill (To give it extra strength)
2. Print the pin on its side (Printing it pointing up like a flagpole will make it weaker)
3. Supports ON (Printing this correctly on its side will require supports)
Picatinny Receiver Blank
1. Supports ON (Some printers won't require supports but I recommend you turn them on just in case)
2. Infill? Fully your choice (I prefer 100% infill because it is a tiny print and wont take long anyway)
DISCLAIMER
This Picatinny Receiver Blank was made for use on picatinny compatible nerf guns and is not for use on real firearms.