STLINK V3MINIE robust case V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My ST-LINK/V3-MINI came with a slightly wider connector that did not fit the original case. The top cover was modified a
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to modify the top cover slightly because the ST-LINK/V3-MINI I own uses a wider connector. As a result, the connector opening in the upper shell did not fit my programmer. I therefore adjusted the top part of the case to accommodate the larger connector and uploaded this modified version here. The rest of the design remains unchanged.
I use the ST-LINK/V3 interface for connecting and programming LoRa devices. It is primarily used with STM32CubeIDE for firmware development, debugging, and troubleshooting. The modified case provides enough clearance for the wider connector on my unit.