X carriage PM single piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavily inspired by http://www.thingiverse.com/thing:164367 and always looking to make improvements to my machine, im…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Heavily inspired by http://www.thingiverse.com/thing:164367 and always looking to make improvements to my machine, im experimenting with some additions & alterations to WIldseyed original design.
The main thing is id like to create a universal "slot" below the carriage surface into which accessories can be fitted > fan holders/ cooling ducts/ nut traps etc
This is by no means finished but definitely a work in progress.
Im currently working away from my printer so i wont be able to try things out till later in the month.
My first tests will be to see what perimeter / wall thickness print fill percentage works best
Ill be messing around with / adding to this in the coming weeks so check back if you re interested in developments.
Update 1 > added 40mm fan duct for E3D V6
Update 2 > added T2 & plain belt clamps
All comments / ideas welcome
Category: 3D Printer Parts