Clemson Planetary Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print in place Clemson planetary gear medallion.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a print in place Clemson planetary gear medallion. It is baout 3.5 inches by 3.5 inchs and 0.25 inches thick. It needs to be printed in place using washaway support allowing the gears to move. For the class ring planet I have provided the native SW file allowing you to change the graduation year if you need me to change it message me and I can change it for you and send the file over. If you can do it you need to change the sketch of Boss-Extrude5 to the correct graduation year. To repalce it in the SW assembly you need to right click on the part in to the left then hit the button at the very bottom that looks like two down arrows, then you need to find replace components and selcet the part you modified and make sure you choose for it to match the mates so the gears still work.