1 / 1
Valve Index VROptician Lens Adapter for Steam Frame — zdjęcie 1

Valve Index VROptician Lens Adapter for Steam Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom print I made so I could mount my Valve Index Prescription VROptician lenses onto my steam frame.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
1
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

*DISCLAIMER* I haven't had much time to play test with these on! I was able to use them for a decent four hour session and they seemed fine. I'll update as I use them more. If you use them and have any sort of feedback, please feel free to leave a comment!

This is a slimmed-down combination of of the Frame Lens Template  and the NEWER VROptician lens mount, designed to give the user as wide of a field-of-view as possible.

I plan to slim down the design even more. As of the current moment, the upper-left edge of the Index lens mount doesn't even sit flush with the lens, which means it could be removed and the lens would still sit properly in the mount.

I included the two separate parts of the adapter as well, in case the measurements don't sit right for any reason. You can adjust the size, position, and trim to your liking. If you have trouble getting a good fit on the Frame side, I recommend printing it a tad larger and then applying some electrical tape in two or three spots around the mount.

Tagi