NEJE N40630 (30W) Laser Air Assist (.stl & .step)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An air assist implementation for the NEJE N40630 laser
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 231
- Wydruki
- 2
- Wyświetlenia
- 990
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon plumbers tape. On the inside of the hollow tube there is a small ring through which the lens is pushed and which additionally contributes to the sealing.
The distance between the lowest part of the aluminum laser body and the tip of the air assist is 18 mm.
Print the air assist with the nozzle pointing upwards.
If you have any wishes on alterations, feel free to comment and i will try my best to optimize the model!