Babylon 5 Shadow Ship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 400mm wide Shadow ship from Babylon 5. I didnt draw the original model, the original can be found here:…
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 398
- Wydruki
- 0
- Wyświetlenia
- 2346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a 400mm wide Shadow ship from Babylon 5.
I didnt draw the original model, the original can be found here: https://www.thingiverse.com/thing:40536
But i wanted a larger one than my print bed could do in one piece, and the original model had some faults, so i have fixed it up, resized it, and sliced it up to be printed on a 200x200mm print bed.
The ship has 3 layers, top, middle, and bottom, and assembly should be self explanatory. There is no obvious mounting point between the top and middle layers because in the show there was actually a gap, so I simply glued it in place with CA where it looked right.
The spines look angular in the model, but due to how FDM works, they come out with a nice texture, and generally only a light sanding is needed. I printed mine in black PLA and haven't even bothered to paint it since i like the finish so much.
The parts are mostly angled with flat surfaces to the bed, but you WILL need supports for the spines!
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: any PLA Black
Category: Vehicles