Moon Lamp screw base ONLY (USB powered LED strip version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a new base for the (fantastic) "Progressive Detail Moon Lamp with Rechargeable Moon station" model by…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 1091
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I designed a new base for the (fantastic) "Progressive Detail Moon Lamp with Rechargeable Moon station" model by moononournation so that the lamp would work with stuff that I already had lying around.
This .stl file is the BASE ONLY, you should download the "moon" file from the original thing https://www.thingiverse.com/thing:3444020
The base screws in quite easily and is designed to fit an MT3608 DC-DC boost converter and a 15 x 10 mm rocker switch, so that you can power any 12 V LED strip. The strip can be wrapped around the top cylinder.
I have used 30 cm of 5630 cold white LED strip, but you can get away with 15 to 20 cm. I had to downvolt it to 10.2 V because it was getting a little hot, but it is still PLENTY bright.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2 (adaptive 0.12 to 0.28mm in Cura)
Infill:
10%
Filament: Basicfil PLA White
Notes:
Print upright, with supports, at 0.2 mm (or better) resolution. I used adaptive layers on Cura 4.8 in the range 0.12 to 0.28 mm, 2 perimeters, 10% infill. and in this way the print takes about 2 hours.
Assembly
Use hot glue to attach the DC-DC converter PCB and to fix the wires in place.
The adhesive backing of the LED strip doesn't like to adhere to PLA, so use a liberal amount of superglue to make it stay in place.
Category: Decor