Support Bracket for Harbor Freight Bauer toolbox frunk replacement for EV6 RWD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supprot bracket for harbor freight frunk replacement
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The EV6 RWD has a tiny frunk that's largely useless. Fortunately the frunk can be replaced by a harbor freight toolbox:
https://www.harborfreight.com/large-modular-toolbox-58511.html
This bracket is to provide additional support. Print in cf-nylon or maybe regular ASA.
It's been awhile since I've done this mod; IIRC the spacer goes between the box and the beam. You'll have to drill the bottom of the box and re-use the bolts from the original frunk, perhaps after using this bracket as alignment to determine where the holes go. https://www.printables.com/model/608215-kia-hyundai-logo-nameplates-for-bauer-harbor-freig
Use the following model to swap the logo