Hypercube Evolution LM8UU Prusa MK3 X-Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm building a Hypercube Evolution with a Prusa MK52 Heated bed. Trying to use the new Prusa MK3 design that has the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1096
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I'm building a Hypercube Evolution with a Prusa MK52 Heated bed.
Trying to use the new Prusa MK3 design that has the cables neatly tucked away.
I mashed together the Hypercube and Prusa X-Carriages together but had to widen the carriage to get it all to fit.
Can't test it until I have built my hypercube though.
Get the rest of the parts for the Prusa Github. Remember to select the MK3 in their Github.
I will print the end product in black PETG to match the MK3 Extruder.
The MK3 Extruder needs to printed in black because of the sensitivity of the filament sensor.
Tested it on the bench:
- On my 320mm rods I have 294mm X travel.
- Looks like I have to lower the Z by 20mm to clear the extruder stepper in the front Y direction. (Will hit the front of the frame otherwise)
You do have to take off the servo's connector to be able to get it thru but using a small screwdriver you can unhook the cable connector pins one by one and pull them out of the connector.
- Update 19/08/218
Been working on a version with an integrated cable chain. So be carefull to download the correct SLT files.
- Update 20/08/218
Starting to become a remix of the original HyperCube Evolution. So I will probably build the printer and update this thing with all the parts I end up using.
- Update 28/08/218
I have split the Y-Carriage with Chain Holder into two separate parts to make it easier to print
- This is still a work in progress so please pay attention to orientation when slicing the files.
BOM:
- 4x 30x30 Aluminium Extrusion 420mm (Y)
- 6x 30x30 Aluminium Extrusion 410mm (X)
- 4x 30x30 Aluminium Extrusion 600mm (Z)
- 2x 20x20 Aluminium Extrusion 415mm (Bed)
- 3x 20x20 Aluminium Extrusion 140mm (Bed)
- 2x 8mm Steel Precision Rod 450mm (X)
- 2x 10mm Steel Precision Rod 410mm (Y)
- 4x 12mm Steel Precision Rod 426mm (Z)
- Prusa MK52 Y-Carrier
- Prusa MK52 Heated Bed
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
30
Notes:
Print in PETG.
Category: 3D Printer Parts