1 / 1
Slot Car Tire Barriers for 132, and 124 Carrera and Scalextric Slot Car tracks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The barriers are based on the on the rear tire size of the NASCAR NextGen ZL1 tires and are stacked four tires high.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (29)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
These are the 3D-printed tire barriers I use on my track. The dimensions of the tires in these files are based on the rear tire size of the NASCAR NextGen ZL1 tires and are stacked four tires high. Each barrier (based and unbased) has either three tapered screw holes (#8 screw) located inside of the tires, one on each end and one approximately in the middle (total of three holes). Or three magnet holes one on each end and one in the middle.
